Aa:Install Ab:Add Ac:Scan Ad:Scan all Ae:Copying file AA:Copying model names... A2:[0][Welcome to ^0!| |Please make sure that all your devices are connected in both directions with the computer and that they process System Exclusive messages.|For an automated installation, you have two choices:|• Simply click the “Scan All” button in the “Install” window. Then all supported devices are scanned which however takes a while.|• Select the connected devices in the “Install” window (shift-click for multiple selection) and click the “Scan” button.][OK] A6:[1][Please click on “Scan” to scan the selection automatically or “Add” to add it manually.][OK] C1:[2][There are no devices selected.|Perform this operation on all devices?][Cancel|OK] C2:Computer C3:[2][Not all data could be received from ^0.][Cancel|Skip|Retry] C4:[1][Load new Preferences:|Save current Preferences “^0” first?][Don’t save|Cancel|OK] C5:[0][Do you want to transmit the loaded entries or move them into a Library?][Abort|Library|Transmit] C7:[2][No suitable SysEx data found. It seems the file does not contain SysEx messages.][OK] C8:[0][Do you want to transmit the loaded entries?][Abort|Transmit] C9:[1|CAUTION!][Device entries have been loaded from Preferences file.|Possibly, your devices contain different data in the meantime. If you are in doubt, better receive all data again.][No further warnings|OK] CE:Preferences CG:Library CI:Module Ca:Setup Cb: &New ||Add new devices, create new files Cc: &Install...|^D|Opens the Install window Cd: &Scan all models|^mD|Installs all connected devices automatically Cf: &Load and transmit File...|^L|Loads a file and transmits its contents to the device(s) Cg: &Build Library||Creates a new Library out of certain entries Ch: Save &as...||Creates a new Library out of certain entries and saves it as a file Ci: Save &Library for Logic Song||Creates a new Library out of certain entries and saves it as a file which is automatically reloaded when the appropriate Logic Song is loaded Cj:[1][You need LOGIC Version 2.5 or newer to perform this function.][Cancel] Cm: &Editable Entries||Executes the command for all Entries which can be edited Cn: &Memory||Executes the command for all memory locations Co: &All Entries||Executes the command for all Entries Cp: &Selected Entries||Executes the command for all selected Entries Cq: &Known Entries||Executes the command for all currently received Entries D1:[2][No new Device found!|Please check MIDI cables and Devices. If you add the Devices with “Manually”, you have to adjust all settings yourself.][Cancel|Manually|Retry] D2:[1][There is already a ^0.|Do you want to add a ^1?][Cancel|OK] D3:(unknown) D4:already used: D5:[3][No more Device ID’s.][Cancel] D6:[3][Do you really want to delete all selected Devices (undo not possible)?][Cancel|OK] D7:[2][There is already a compatible Device with the same ID on this output.][Cancel] D8:[2][This would cause a MIDI loop.][Cancel] Da: &Entry ||Commands for Entries Db: &Initialize|^I|Initializes the parameters of the selected Entries Dc: &Rename|^mN|Opens a window to rename the selected entry Dd: &Surf!|^D|Sends the selected Entries to the corresponding edit buffers De: &Dive!|^E|Opens the Editor window for the selected Entries Df: &Append to Library|^mL|Appends the selected Entries to the currently active Library Dg: &Next Device|^TAB|Changes to the next device in the Setup list Dh: &Previous Device|^mTAB|Changes to the previous device in the Setup list DA:Special Parameters DB:No Device E1:[1][You are currently comparing with the old version. Do you want to continue with this one? You will lose the edited version.][Cancel|OK] E2:[1][There is nothing selected. Perform the operation for the whole entry?][Cancel|OK] Ea: &Editor Eb: &Link Window|^mL|Switches automatic linking to selection in other windows on or off Ec: &Overview|^mO|Switches the overview mode on or off Ed: &Compare|^mC|Switches to the original version of the edited Entry Ee: &Store|^mS|Stores the edited Entry, overwriting the original Entry Ef: Store &in...|^mM|Stores the edited Entry in a choosable memory location Eg: S&napshot|^mN|Appends the edited Entry to the Library “Snapshots” Eh: New &Window|^E|Opens a new window with the selected parameter group Ei: &Initialize|^I|Initializes the selected parameter group or the entire entry Ej: &Randomize|^D|Randomizes the selected parameter group or the entire entry Eo:Overview Er: &Range ||Commands for the selected keyboard range Es: &Full Range||Sets the selected range to the entire keyboard range Et: &Initialize||Initializes the selected range Eu: Mirror &vertically||High values become low and vice versa Ev: Mirror &horizontally||Values for high notes are swapped with those of low notes Ew: I&nterpolate||Draws a straight line between the values of the left and right borders Ex: &Extrapolate||Continues the range’s value shape outside the range EA:Original version Edited version F1:[1][Standard MIDI Files will be loaded into the suitable Devices.][Cancel|OK] F2:[2][File “^0” is not a SoundDiver ^1 ^2 File!][Cancel] F3:[3][Module file “^0” is outdated and cannot be used with this version of ^1.|Please get an update of the Module file and move it to the “^2” folder.][OK] F4:[3][Error reading file “^0”][Cancel] F5:[2][Error reading/writing file “^0”:|^1.][Cancel^2] F6:[1][Files with raw MIDI data will be loaded into the suitable Devices.][Cancel|OK] FA:Saving FB:Loading FC:[3][Error writing file “^0” (Disk full?)][Cancel] FJ:Auto-Save in %d seconds... Fa:MIDI Monitor G0:[1][Sorry...|This function is not yet implemented.][Cancel] G1:[3][Not enough Memory.][Cancel] G2:[3][Internal Error|Something strange has happened.|Try to avoid it. (%d)][I will] G4:[2][No printable contents in topped window.][Cancel] G6:[3][Illegal Block Offset.][OK] G.:[0][Request the new Devices’ Memories?][Cancel|OK] G!:[3][Memory is getting dangerously low.|Try to save your data and close unused windows and documents.][OK] Ga:OK Gb:Cancel Gc:Abort Gd:Help Ge:About Gf:No Gg:Done Gi:All Gj: &Parameters|aH|Fades the parameter column in or out Gk: &Options ||Options for the window appearance Gl:Skip Gn:(Data unknown) Go:Store Gp:Don’t Store Gq:Overwrite GA:No. GB:Name GC:Module GD:Model GE:Data Type GF:Size GG:Date GH:Comment GI:Sequence GJ:Used by... GK:Uses.. G<:Location GL:Manufacturer G%:Connected to GM:Out Port G&:Return to GN:Device ID GO:Thru Ch GP:Version GQ:Timeout (ms) GR:Send Pause (ms) GS:Play Delay (ms) GT:Patchbay Prg G>:Standard Prg GU:..Out/Ch GV:..Delay GW:Time GX:Master Keyboard GY:Auto-Request GZ: none I I+C I+C+R all H0:Help File H1:(no Help available) H2:Help H3:None (Universal Module is not present). HA:Index HB:Help Files HC:Help System HD:Editor HE:Memory Manager HF:Device Parameter box HG:SysEx Communication Error HH: Module Ha:Important Hb:Mouse Operation Hc:Example Hd:Information He:Listen to MIDI Hf:Copy Operation Hg:Modules: Hh:Adaptations: I0:[2][No suitable Edit Entry found.][Cancel] I1:[2][This Entry is unknown and can’t be requested.|Initialize it?][Cancel|Initialize] I2:[2][This Entry is unknown.|Request it?][Cancel|Initialize|OK] I3:[2][No suitable Target Entry found.|Probably all entries of this data type can only be requested, but not transmitted.][Cancel] I5:[Select a suitable Target Entry.] I6:[Target Entry is receive only (ROM).|Please select a different one.] I7:[To “surf” the entry “%s”, it must be copied to a temporary edit buffer. However, the selected edit buffer has been changed, but not yet saved. Do you want to overwrite it?] I8:[No more Target Entries available.|Please select a different one.] I9:[2][This Entry is unknown.|Request it?][Cancel|OK] IA:[Module %s can’t convert a|%s %s to this %s %s.|Select a different target.] IB:[2][Entry “^0” needs “^1” which is yet unknown.][Abort|Ignore|Ignore All|Request|Request All] IC:[The target Entry is currently not available. Select a different one.] ID:[1][Clear Entries:|Clear Entries in Device as well?][No|Clear] II:[Paste %s %s|to ...] IJ:[Swap %s %s|with ...] IL: received. IM:Copying Entries... IN:Entry in Library “%s” IO:Append to Library “%s” IP:[3][Entries “^0” and “^1” cannot be swapped, because a link in entry “^2” cannot be adjusted accordingly.][Abort] IQ:Calculating Dependencies... Ia:Close Editor Ib:AUTO-STORE edited Entry to Ic:Paste Entry Id:Swap Entry Ie:Store in ... L0:[2][For ^0 of ^1 Library Entries, no suitable Device was found.][OK] L1:[2][No suitable Device found for this Library Entry.][Cancel] L2:[0][Nothing found.][OK] L3:[1][Really delete ^0 entries?][Cancel|OK] L4:[2][“^0”:|Unknown file format.][Abort|Skip] L5:[2][There are no entries selected.|Perform this operation on all entries?][Cancel|OK] L6:[1][Paste: ^0 doubles found.|Delete them?][No|Delete] L7:[3][Library too large.][Cancel] L8:[1][Entry “^1” is used by another Entry.|Delete “^1”?][Cancel|No|OK|All] L9:[1][Entry “^1” is used by ^0 Entries.|Delete “^1”?][Cancel|No|OK|All] L.:[1][Really rename ^0 Entries?][Cancel|OK] LA:Find LB:Find and select objects matching following condition: LC: selected LD:No Selection LE:Find: LF:Find Again LG:Converting POLYFRAME Library ... LH:Searching ... Press ESC to abort LI:More Options LJ:Fewer Options LK:New Title LL:Importing %s File %s ... LM:Copying Entries... LN:Pasting Text... LO:Pasting Entries... LP:Checking Doubles... LQ:not loaded LR:Search in all documents LS: The Name The Model The Data Type The Date The Size The Comment The Data The Location LT: is equal to Selection. is similar to Selection is equal in pairs. is similar in pairs. contains does not contain begins with ends with is is not LU: is is not is before is after LV: is is not is less than is greater than LW: Select one Select all Add to Selection Select in Selection Keep first, delete rest LX:Title LY:Clearing Doubles... La: &Library ||Commands for the Library Lb: &Surf!|^D|Transmits the selected Library Entries for auditioning Lc: &Dive!|^E|Opens editors for the selected Library Entries Ld: Store Se&quence||Stores the currently recorded sequence in the selected Library Entries Le: &Insert Title|^I|Inserts a Title Entry above the first selected Entry Lf: Insert &File...||Inserts a file above the first selected Entry Lg: &Show ||Options for showing and hiding columsn Lh: No&.||Shows or hides the line number Li: &Name||Shows or hides the name (or sorts by it) Lj: &Module||Shows or hides the Module name (or sorts by it) Lk: M&odel||Shows or hides the model name (or sorts by it) Ll: Device &ID||Shows or hides the Device ID (or sorts by it) Lm: Data &Type||Shows or hides the data type (or sorts by it) Lt: &Location||Shows or hides the memory location statement (or sorts by it) Ln: &Size||Shows or hides the size (or sorts by it) Lo: &Date||Shows or hides the creation date (or sorts by it) Lp: &Comment||Shows or hides the comment (or sorts by it) Lq: Se&quence||Shows or hides the sequence flag (or sorts by it) Lr: Used &by...||Shows or hides the links to other entries (or sorts by it) Ls: &Uses...||Shows or hides the links from other entries (or sorts by it) Lw: &All||Shows all columns Lx: &None||Hides all columns Ly: &Sort ||Commands for sorting the library Lz: au&to||Switches automatic sorting on or off M0:[2][SysEx Communication Error:|%s][Help|Abort%s] M1:[2][^0 and ^1 are both disabled. Do you want to open the Preferences window?][Cancel|OK] M2:[3][MIDI Data couldn’t be sent!|Check interface. Switch off unused ports in preferences to speed up the program!][Preferences|OK] M3:Sending %s to %s ... M4:Receiving %s from %s ... M5:Data M7:|Retry M8:%s didn’t respond. M9:[1][If you want to transmit “^0”, you have to transmit the entire Bank.^1][Cancel|^2Transmit] M.:|However, only part of Bank is known.|Initialize unknown Entries? M,:Initialize + M+:[2][Entry “^0” cannot be requested. Try to send an active dump.][Abort|Skip] M-:[2][Some Entries cannot be requested. Try to send these manually.][Cancel|OK] M*:[2][The ^0 is used by another program, LocalTalk or ARA.][Cancel|Use anyway] M=:[3][MIDI Data couldn’t be sent!|Check interface.|Deactivate “Release ... in Background if stopped” in LOGIC.][OK] M?:[2][No suitable LOGIC Instrument for MIDI Thru found.|Create a new one?][Cancel|Create|Always Create] M/:[3][This version of LOGIC is too old to run correctly with AutoLink.|Using AutoLink is NOT recommended.][Quit|Use|Don’t use] M$:Sending MIDI data... M%:[2][A MIDI Time Piece is not correctly configured.|Configure it?][No further warnings|Don’t configure|Configure] Mc:[3][MIDI Data couldn’t be sent!|Check interface. Switch off unused ports in ‘PatchBay’ to speed up the program!][OK] MM:Modem Port MN:Printer Port MA:[3][Module not loaded or Adaptation not found.][Cancel] MB:[3][Module for device “^0” is missing!][Cancel] MD:[1][Module has no Editor for this Entry!][Cancel] ME:[3][Illegal Init Size:|Init Tree -> ^0|Entry Size -> ^1][OK] MF:Loading Module %s ... MH:[0][^0|Version ^1|Release ^2|^3][OK] Pb:Mouse as Slider Pc:Save Device Entries in Preferences file: Pd:editing unknown Entries Pe:closing changed Edit Windows Pf:overwriting edited Entries Pg:overwriting Memory Entries Ph:deleting Doubles Pi:Check Doubles Pj:Modem Port Pk:Printer Port Pl:Check for MTP Pn:MTP Cable Mode Po:Fast Speed Pp:PowerBook Bug Fix mode Ps:Preferences Pt: Communication Global Settings Safety Messages Library Pu:Process incoming MIDI only for active Device Pv:ms additional timeout Pw:3D look Px:Sound Effects Py:Show Progress Pz:Flicker-free redraw PA:Synchronize Screensets PB:Num Lock PC:after loading Device Entries from Preferences PD:Request retries PE:Reopen Libraries PF:Auto-Save Libraries every PG:Auto-Snapshot every PH:Check MTP configuration PI:Set LOGIC &Instrument|^mI|Toggles automatic setting of the selected track’s instrument in LOGIC Qb:Tempo (BPM) Qc:Autoplay Qe:Drum Autoplay Qf:Sequencer Qg:(external) Qh:MIDI Manager Qi:MIDIShare Qj:Mini Sequencer Qk:OMS Ql:AutoLink/LOGIC S1:Computer S2:All from S3:Scanning Patchbay Connections...|Input: |Output: S5:All S6:[2][No Patchbay Connections found.][Cancel|Retry] S7:[1][The models shown italicized in the Install window cannot be scanned - either because this is technically impossible, or because the Adaptation does not yet support scanning.|Please install these devices manually (select them and click the “Add” button).][OK] Sa:Scanning... Sb:Model: Sc:at: Sd:Input: Se:Output: Sf:ID: SA:Connections to Computer SB:Inputs SC:Outputs UA:&Undo %s UB:&Redo %s UC:Can’t Undo UD:Cut UE:Copy UF:Paste UG:Clear UH:AutoStore UI:Move UJ:Parameter Change UK:Sort UL:Surf UM:Initialize UN:Rename UO:Transmit UP:Import UQ:Swap MO: 01 VFX -F VFX -F VFX SD -F VFX SD II -F SD-1 02 SY77 -43 SY77 -43 TG77 -43 SY99 03 T1 -42 T1 -42 T2 -42 T3 04 DX7 -43 DX7 -43 TX7 -43 DX7 II -43 TX802 05 PRO -18uPro/1 -18uPro/2 -18uPro/1 XR -18uPro/2 XR -18 Proteus -18 Proteus XR -18 Vintage Keys 06 MW -3E microWAVE 07 D70 -41 D-70 09 M1 -42 M1 -42 M1R -42 M1R-EX 0A U20 -41 U-20 -41 U-220 0C WS -42 Wavestation -42 Wavestation A/D -42 Wavestation SR 0E M3R -42 M3R 0F D50 -41 D-50 -41 D-550 11 01W -42 01/W -42 01R/W -42 01/W PRO (X) -42 03R/W -42 05R/W -42 X3 -42 X3R -42 X2 -42 X5 -42 X5DR 12PPMM -0 PMM-44 -0 PMM-88 13PA880 -41 A-880 14 JV -41 JV-80 -41 JV-880 -41 JV-1000 -41 JV-90 15 S1000 -47 S1000 -47 S1100 -47 S2800 -47 S3200 -47 S3000 -47 CD3000 16PSYNAPSE -15 Synapse -15 MSB 16/20 -15 MSB Plus -15 MSB Plus Rev2 17PMIDIBAY -3E Midibay 18PKMX -99 KMX-16 -99 KMX-8 19 DP4 -F DP/4 -F DP/4+ -F DP/2 1A K2000 -7 K2000 -7 K2000R -7 K2500 -7 K2500R 1B TS -F TS-10 -F TS-12 1C JV1080 -41 JV-1080 -41 XP-50 -41 XP-80 -41 JV-2080 -41 JV-1010 -41 XP-30 1D ULTRAPRO -18 Ultra Proteus -18 Morpheus 1E PROPHECY -42 Prophecy 1F QS -8E Quadrasynth S4 -8E Quadrasynth S5 -8E Quadrasynth+ S8 -8E Quadrasynth+ S9 -8E QS6 -8E QS7 -8E QS8 -8E QSR -8E NanoSynth -8E QS6.1 -8E NanoBass -8E NanoPiano -8E QS7.1 -8E QS8.1 20 TRINITY -42 Trinity -42 Trinity plus -42 Trinity pro -42 Trinity pro-X -42 TR-Rack 21 EOS -18 E4 -18 e64 -18 E4K -18 e64FX -18 E4X Turbo -18 E4X -18 e6400 -18 E4XT Ultra -18 e6400 Ultra 22PMX8 -87 MX-8 23 K5000 -40 K5000W -40 K5000S -40 K5000R 24 KT -F KT-76 -F KT-88 -F E-Prime -F KT-88 Plus 25 MWII -3E MicroWave II -3E MicroWave XT -3E MicroWave II (XT board) -3E MicroWave PC 26 MR -F MR Rack -F MR-61 -F MR-76 -F ZR-76 -F FIZMO 27 UNITOR8 -10B1 Unitor8 -10B1 AMT8 28 MC505 -41 MC-505 -41 JX-305 29 DMPRO -8E DM Pro 2A POD -8C POD 2B FS1R -43 FS1R 2C CZ -44 CZ-101/CZ-1000 -44 CZ-3000/CZ-5000 -44 CZ-1 2D SIRIUS -3F Sirius 2E EX5 -43 EX5 -43 EX7 -43 EX5R 2F VZ -44 VZ-1 -44 VZ-10m 30 POLYMORPH -3F Polymorph 31 PRO2000 -18 Proteus 2000 -18 Audity 2000 32 XG -43 MU50XG -43 MU80XG -43 MU100XG -43 DB50XG -43 SW1000XG -43 MU128XG -43 WF192XG -43 CS1x -43 CS2x -43 MU90XG -43 MU10XG 33 TD10 -41 TD-10 34 SE70 -41 Boss SE-70 FF UNI -6 300 -3E 4Pole -52 9010 -41 A-50, A-80 -41 A-90 -41 Alpha Juno 1/2 -FsASR-DISKS -10A9 BassStation -10A9 BassStaRack -25 bit01 -25 bit99 -41 Boss ME-5 -43 CBX-T3 -8 Chroma -43 Clavinova PF P-100 -41 D-5 -41 D-10, D-20 -41 D-110 -8E D4 -43 D1030 -41sDEP-3 -41 DEP-5 -41 DJ-70 -30 DLS223 -30 DLS300 -43 DMP7 -43 DMP9-8 -43 DMP9-16 -43 DMP11 -47 DP88 -4C DPS-D7 -4C DPS-M7 -4C DPS-R7 -41 DR-660 -1A DR-X -30 DRP15 -90 DSP-256 -90 DSP-256XL -42 DVP-1 -42 DW-8000, EX-8000 -43 DX7IIE! -43 DX11 -43 DX21/27/100 -41 E-660 -43sEMT-10 -1088 EVS-1 -1A EXT -15 FADERMASTER -43 FB-01 -41 FC-100 Mk.II -34 Function Junction/Plus -43 FX900 -0 Generic -0 Generic SysEx -90 GFX-1 -41 GP-8 -41 GR-50 -41 GS-6 -90 GSP7 -90 GSP21 -90 GSP-2101 -55 HAMMOND XB-2 -55 HAXB2PRESETS -90 IPS 33B -41 JD-800 -41 JD-990 -1096 JMP-1 -41 Juno-106 -41 JX-1 -41 JX-8P -40 K1 -40 K4 -40 K5,K5m -0sKeys -1090 LMTC/TASCAM TSR-8 Remote -6 LXP-1 -6 LXP-5 -6 LXP-15 -10 M-1000 -4E M-2516 -4E M-2524 -33 M5000 -10 Matrix-6, Matrix-6R -10 Matrix-12 -1 Max -47 MB76 -47 ME-80P -90 MEQ 7 -90 MEQ 14 -7 MIDIBOARD -8E MIDIVERB III -0sMixer -41 MKS-7 -41 MKS-50 -41 MKS-70 -41 MKS-80 -0sMonitor -41 MT-32 -43 MU50 -1 MultiTrak -1A MV II -1A MV III -0sNiche-ACM -33 Nord Lead -33 NordLd 2 -0sNumerical Systems -10 OB-8 -2B OSCAR -41 PAD-80 -9B PC-1600 -6 PCM-70 -47 PEQ6 -41 PRO-E -18 PRO/CUSSION -0sProgram-Selector -43 ProMix 01 -1 Prophet5 -1 Prophet10 -1 Prophet600 -1 Prophet T8 -3E Pulse -8E QUADRA 2 -8E QUADRA-GT -8E QUADRA-Plus -8E QUADRAVERB -3F Quasar -43 QY10 -43 QY10 Pattern Names -41 R-5 -41 R-8 -41 R-8M -41 R-70 -43 RM50 -41 RSP-550 -40 RV-4 -41 Rhodes MK-80 -0sRoland Addresses -41 RSP-550 -40 RV-4 -41 S-330 -41 S-550 -41 S-770 -41 SC-55 -42 SDD-3300 -41 SDE-330 -41 SE-50 -1A SGE -1A SGE MACH II -1 SIX-TRAK -9B Sp. Analog Filter -41 SPD-8 -41 SPD-11 -9B Spectrum Synth -43 SPX90 -43 SPX900 -43 SPX990 -43 SPX1000 -F SQ -F SQ-80, ESQ-1, ESQ-M -8E SR-16 -41 SRV-2000 -43 SY55TG55 -43 SY85 -61 T-303 -33 TC1128 -33 TC2290 -41 TD-7 -43 TG33 -43 TG100 -43 TG500 -90 TSR-24 -43 TX16W -43 TX81Z -41 U-110 -90 Valve FX -43 VL1 v2 -43 VL1-m v2 -43 VL7 v2 -3F VOLCON 128-D -1 VS -1sVS-PROGRAMMER -43 W5/W7 -1A X-15 -40 XD-5 -10 Xpander -43 YS_TQ5 Mu:(undefined) Ma:(other) 01 Sequential 02 IDP 03 Voyetra/Octave-Plateau 04 Moog 05 Passport Designs 06 Lexicon 07 Kurzweil 08 Fender 09 Gulbransen 0A AKG 0B Voyce Music 0C Waveframe 0D ADA 0E Garfield 0F Ensoniq 10 Oberheim 11 Apple 12 Grey Matter Response 13 Digidesign 14 Palm Tree Instruments 15 JL Cooper 16 Lowrey 17 Adams-Smith 18 Emu 19 Harmony Systems 1A ART 1B Baldwin 1C Eventide 1D Inventronics 1E Key Concepts 1F Clarity 20 Passac 21 Siel 22 Synthaxe 23 Stepp 24 Hohner 25 Crumar / Twister 26 Solton 27 Jellinghaus 28 Southworth 29 PPG 2A JEN 2B SSL Limited 2C P. Strüven 2D Neve 2E Soundtracs 2F Elka/General Music 30 Dynacord 31 Intercontinental 32 Drawmer 33 t.c. / Clavia / ddrum 34 Audio Architecture 35 GeneralMusic 36 Cheetah 37 C.T.M. 38 Simmons 39 Soundcraft 3A Steinberg 3B Wersi 3C Avab Electronik Ab 3D Digigram 3E Waldorf 3F Quasimidi 40 Kawai 41 Roland 42 Korg 43 Yamaha 44 Casio 45 Moridaira 46 Kamiya Studio 47 Akai 48 Japan Victor 49 Mesosha 4A Hoshino Gakki 4B Fujitsu 4C Sony 4D Nisshin Onpa 4E TEAC 4F System Product 50 Matsushita 51 Fostex 52 Zoom 53 Midori 54 Matsushita 55 Suzuki 56 Fuji 57 Acoustic Technical Lab. 61 Syntecno 7D Non-Commercial SysEx 7E Non-Real-Time SysEx 7F Real-Time SysEx Mb: *** 3-Byte 00 01 Warner New Media 00 02 Music Logic Systems 00 03 PAIA 00 04 Othertech 00 05 K-Muse 00 06 Stypher 00 07 Digital Music 00 08 IOTA Systems 00 09 New England Digital 00 0A Artisyn 00 0B IVL 00 0C Southern Music Systems 00 0D Lake Butler Sound 00 0E Alesis 00 0F Sound Creation 00 10 DOD/Digitech 00 11 Studer-Editech 00 12 Sonus 00 13 Temporal Acuity Prod. 00 14 Jeff Tripp/Perfect Fretworks 00 15 KAT 00 16 Opcode 00 17 Rane Corp. 00 18 Spatial Sound/Anadi Inc. 00 19 KMX 00 1A Allen & Heath Brenell 00 1B Peavey Electronics 00 1C 360 Systems 00 1D Spectrum Design and Dev. 00 1E Marquis Music 00 1F Zeta Systems 00 20 Axxes (Brian Parsonett) 00 21 Orban 00 22 Indian Valley Mnfg. 00 23 Triton 00 24 KTI 00 25 Breakaway Technologies 00 26 CAE 00 27 Harrison 00 28 Future Lab 00 29 Rocktron 00 2A PianoDisc 00 2B Cannon Research Group 00 2D Rogers Instrument Corp. 00 2E Blue Sky Logic 00 2F Encore Electronics 00 30 Uptown 00 31 Voce 00 32 CTI Audio / Intel 00 33 S&S Research 00 34 Broderbund 00 35 Allen Organ Co. 00 37 Music Quest 00 38 APHEX 00 39 Gallien Krueger 00 3A IBM 00 3C Hotz 00 3D ETA Lighting 00 3E NSI 00 3F Ad Lib 00 40 Richmond Sound Design 00 41 Microsoft 00 42 The Software Toolworks 00 43 RJMG/Niche 00 44 Intone 00 47 GT Electronics/Groove Tubes 00 4D Studio Electronics 00 4F InterMIDI 00 55 Lone Wolf 00 59 Marion Systems 00 64 Musonix 00 65 Turtle Beach Systems 00 74 Ta Horng Musical Inst. 00 75 eTek (formerly Forte) 00 76 Electrovoice 00 77 Midisoft 00 78 Q-Sound Labs 00 79 Westrex 00 7A NVidia 00 7B ESS Technology 00 7C MediaTrix Peripherals 00 7D Brooktree 00 7E Otari 00 7F Key Electronics 01 01 Crystalake Multimedia 01 02 Crystal Semiconductor 01 03 Rockwell Semiconductur 01 04 Silicon Graphics 01 05 Midiman 01 06 PreSonus 01 08 Topaz Enterprises 01 09 Cast Lighting 01 0A Microsoft Consumer Division 01 0C Fast Forward / Line 6 01 0D Headspace (Igor's Labs) 01 0E Van Koevering Company 01 0F Altech Systems 01 10 S&S Research 01 11 VLSI Technology 01 12 Chromatic Research 01 13 Sapphire 01 14 IDRC 01 15 Justonic Tuning 01 16 TorComp Research Inc 01 17 Newtek Inc 01 18 Sound Sculpture 01 19 Walker Technical 01 1A PAVO 01 1B InVision Interactive 01 1C T-Square Design 01 1D Nemesys Music Technology 01 1E DBX Professional 01 1F Syndyne Corporation 01 20 Bitheadz 01 21 Cakewalk 01 22 Staccato Systems 01 23 National Semiconductor 01 24 Boom Theory / Adinolfi Alternative Percussion 01 25 Virtual DSP 01 26 Antares Systems 01 27 Angel Software 01 28 St Louis Music 01 29 Lyrrus dba G-VOX 20 00 Dream 20 01 Strand Lighting 20 02 Amek Systems 20 04 Dr. Böhm/Musican International 20 06 Trident Audio 20 07 Real World Studio 20 08 Evolution Synthesis 20 09 Yes Technology 20 0A Audiomatica 20 0B Bontempi/Farfisa 20 0C F.B.T. Elettronica 20 0E LA Audio (Larking Audio) 20 0F Zero 88 Lighting 20 10 Micon Audio 20 11 Forefront Technology 20 13 Kenton Electronics 20 15 ADB 20 16 Marshall 20 17 DDA 20 1F t.c. electronics 20 20 Doepfer 20 29 novation 20 2B Medeli Electronics Co 20 2C Charlie Lab SRL 20 2D Blue Chip Music Technology 20 2E BEE OH 20 2F LG Semiconductor 20 30 TESI 20 31 Emagic 20 32 Behringer 20 33 Access 20 34 Synoptic 20 35 Hanmesoft 20 36 Terratec Electronic 20 37 Proel SpA 20 38 IBK MIDI C0: ** 000..031 (1 line each, undefined: blank) Bank Select Modulation Breath Foot Pedal Portamento Time Data Entry Main Volume Balance Pan Expression Effect Control 1 Effect Control 2 General Purpose #1 General Purpose #2 General Purpose #3 General Purpose #4 C6: ** 064..127 (1 line each. undefined: blank) Sustain Portamento Switch Sostenuto Soft Pedal Legato Footswitch Hold #2 Sound Variation Timbre/Harmonic Int. Release Time Attack Time Brightness Sound Controller #6 Sound Controller #7 Sound Controller #8 Sound Controller #9 Sound Controller #10 General Purpose #5 General Purpose #6 General Purpose #7 General Purpose #8 Portamento Control Effect 1 Depth Effect 2 Depth Effect 3 Depth Effect 4 Depth Effect 5 Depth Data Increment Data Decrement Non-reg. P/N LSB Non-reg. P/N MSB Reg. P/N LSB Reg. P/N MSB * Mono Pitch CA:Aftertouch CN:Non assigned no. F7:[1][The file contains several dumps for the same entries.|You can|- skip new version (keep old version)|- use new version (overwrite old version)|- move all data to a Library (get all versions)][Abort|Skip|New version|Library] F8:[0|Export File][Please select file format:|- SYX / MidiEx / Raw MIDI Data|- Standard MIDI File (SMF)][Cancel|SYX|SMF] Ck: &Export...||Exports certain Entries to a Standard MIDI or SYX file F9:[1|Export SYX File][Delays are needed to transmit the data correctly. SYX files do not support delays. You should use Standard MIDI Files instead.|If you continue, the created file might not be processed correctly by the receiving device.][Continue|Cancel] F.:[2|Export File][You try to export a dump which requires handshake communication. This will not work if the actual MIDI communication does not take place.|Either choose one-way communication (if possible) or export the file using “Start File Capture...” instead.][Cancel] M6:Formatting %s for Export File ... P1:[2][The Preferences are not loaded completely. Do not save them, as you would overwrite the Preferences file with incomplete data otherwise.][OK] Qa:Free Memory: PJ:Prefer selected Devices as target PK:Dependecy Management P2:[2][Could not initialize device “^0” which is necessary to load the entries stored in the Preferences file.|A Module or Adaptation file was not found or could not be loaded for another reason.][Abort] P3:[0][Save Preferences to “^0”?][Don’t save|Cancel|OK] PL:saving Preferences P4:[2][The Preferences are not loaded completely.|Save them nevertheless to “^0”?][Don’t save|Cancel|OK] Be:Deinstall B0:[1][Please insert “^0 Master Disk” to ^1 ^2.][Cancel|Continue] Ba:install Bb:deinstall B2:[2][Sorry, no install left on this disk.][OK] B3:[1][Disk must not be write protected!][Continue] B4:[2][“^0 Master Disk” with serial no. ^1 is required.][OK] Bc:installed Bd:deinstalled B5:[1][^0 successfully ^1.|You have a remaining authorization count of ^2.][OK] B6:[3][This is not a Master Disk.][Quit|Continue] B7:[1][Do you really want to deinstall ^0?][Cancel|OK] A7:[1][^0 “^1” is not yet installed.|To install this file, please quit and use the Installer, or copy it manually to the Diver folder.][Abort|Skip] G+:[3][%s is about to terminate unexpectedly.|Try to save your files.|It's better to not overwrite the existing files.| |Please report how this occured.|Email: report@emagic.de][Don’t save|Save] S8:[1][The models shown in grey in the Install window cannot be scanned because the Module or Adaptation files supporting these models cannot be found.|To scan these models, quit ^0 and install these files with the Installer or copy them manually in the “^1” folder.][OK] MG:[3][Could not load Module “^0”|(^1)][Cancel] C.:[2][No suitable SysEx data found.|Either there is no suitable device installed in the Setup, or the dump message is not supported by the Module or Adaptation.|Either install a suitable device, or import the file to a “Generic SysEx” device.][Cancel|Install|Generic SysEx] F0:[3][Module file “^0” is too new and cannot be used with this version|of ^1.|Please get an update of the ^1 application file.][OK] Cl: &Store all edits|^mS|Stores all currently edited Entries in the source locations A1:[0][Welcome to ^0!| |First, configure your ports:|• If the “Network” control panel has “LocalTalk” selected, switch off AppleTalk in the Chooser.|• If you have MIDI Interfaces connected to the Printer Port, activate the switch “Printer Port”.|• If you have a MIDI Time Piece™ (I or II) or a newer Studio 4™, it has already been detected (“MTP Cable Mode” is on).|• If you have an Opcode Studio 5™ or an older Studio 4™, you must switch off “Check for MTP” and switch on “MTP Cable Mode”. The “Fast Mode” switch must be set correctly.|With a Studio 5™, you must futher make sure that the “MTP Compatibility Setup” has assigned OMS™ devices to all inputs and outputs, and that the “All” cable is routed to an appropriate Virtual Instrument. As an alternative, you can use OMS.][OK] P5:[2][Entries for device “^0” have been saved using a different version of ^1 Module “^2”. Loading them with the current Module might lead to wrong data. Load them nevertheless?][Cancel|Skip|Load] J1:[1][Memory is tight for flicker-free drawing.|Please increase partition size, use lower screen color resolution, or switch off “flicker-free redraws” in the Preferences.][OK] Fb: Time Stamps Fc: MIDI In Fd: MIDI Out B1:[1][This copy of ^0 is not authorized to run on your hard disk.|Select “Authorize” to enable this copy to run on your hard disk without requiring the master diskette.|Select “Continue” to run this copy|or “Quit” to quit ^0.][Authorize|Quit|Continue] Fe: ... of status bytes only Ff: Note Off Fg: Note On Fh: Poly Pressure Fi: Control Change Fj: Program Change Fk: Channel Pressure Fl: Pitch Bend Fm: System Messages Oa:Checking for OMS PO:Use MIDI Manager if available PP:Use OMS if available Ob:Establishing OMS Input Connections Oc:Establishing OMS Output Connections O1:[1][There is no output possible.|Please restart ^0 after creating an OMS studio setup.][OK] O2:[1][OMS has been detected. Do you want to use it?][Never|Don't use now|Use now|Always] Od:Initializing OMS Oe:OMS Studio Setup… Of:OMS MIDI Setup… PQ: never ask always A8:[0][Welcome to ^0!| |Please make sure that OMS is set up correctly. Only devices set up in OMS will be scanned by ^0.| |If you don’t need OMS in other applications, you can use ^0 without OMS as well,even if you have a Studio 4™ or Studio 5™.|Please see the manual for further details.][OK] S9:[2][There are no MIDI outputs available.|Please first configure the communication preferences.][OK] Qo:OMS + AutoLink UR:Can’t Redo Md:[3][This version of LOGIC is too old to run correctly with AutoLink and OMS.|Please update LOGIC to version 3.0 or use AutoLink without OMS.][OK] I4:[2]%s[Cancel] M!:[3][A MIDI Thru loop occured. To prevent a lockup, MIDI Thru has been switched off.][OK] Me:[3][To set the Unitor8 to fast mode, you must press the Panic/Patch button now.| |If you have more than one Unitor8 units, press the Panic/Patch button at the unit connected directly to the computer.][OK] W1:[0][You are about to close the last window of this Library.|Close the Library as well?][Keep opened|Close] Af:Recalling last Screenset... S0:[2][Device “^0” does not react.|Make sure it is switched on and correctly connected to the computer.|If you have changed the connections or the Device ID, click “Re-scan”.][Abort|Skip|Delete|Retry|Re-scan] PR:Check device connections at startup Sg:Checking connections to %s S4:[2][You have installed patchbay “^0” manually, but forgot to assign the connections from and to the computer.|Please add these assignments in the “Special parameters” box and try again.][OK] IR:[1][“Master Keyboard” cannot be used together with “Standard Prg”.|You have to define the connection between the master keyboard and the computer manually in the patchbay.][OK] M(:A dump message from %s was not complete. Mf:[1][“Hold transmission” has been switched off in order to transmit the entries.][OK] Gm:Preserve Thru Port/Ch Gh:Velocity Pq:Create LOGIC Instruments FL:[2][Data has been received for bank “^0” which is currently hidden. Please activate this bank in the Special Parameters box and try again.][Continue|Abort] A0:[0][Welcome to ^0!| |Please choose the language to be used by ^0 (“Auto” = language depends on keyboard layout).|You can change the language in the Preferences later.| |Willkommen in ^0!| |Bitte wählen Sie die von ^0 zu verwendende Sprache (“Auto” = die Sprache hängt von der Tastaturbelegung ab).|Sie können die Sprache später auch in den Voreinstellungen ändern.][Auto|English|Deutsch] A9:[1][The new language will become effective after restarting ^0.| |Die neue Sprache wird erst nach einem Neustart von ^0 wirksam.][OK] PS:Language: IS:[2][This Entry is unknown and can’t be requested nor transmitted. Please use a different bank for editing.][Cancel] Xa:&About ^0...||Shows the About window Xb:&License Agreement...||Shows the license agreement Xc:&SoundDiver Features...||Shows a list of all SoundDiver features Xd:Emagic &Distributors...||Shows a list of the Emagic distributors Xe:&New|^N|Creates a new Library Xf:&Open...|^O|Opens a Library, Standard MIDI File or Preferences File Xg:&Close Library||Closes the active Library Xh:&Save|^S|Saves the active Library Xi:Save &as...|^M|Saves the active Library with a different name Xj:&Revert to Saved||Brings the active Library to the state before last saving it Xk:Pa&ge Setup...||Sets up Page size and Printer Xl:&Print...|^P|Prints the current window's contents Xm:&Import...||Imports alien file formats Xn:E&xport MIDI File...||Exports the selected Entries / Devices memory as a Standard MIDI File Xo:Pr&eferences...||Opens the Preferences window Xp:Sa&ve Prefs as...||Saves the Preferences to a new file name Xq:&Quit|^Q|Quits ^0 Xr:&Undo|^Z|Undoes the last action Xs:&Redo|^Y|Redoes the previously undone action Xt:Cu&t|^X|Cuts the selection and moves it on the Clipboard Xu:&Copy|^C|Copies the selection to the Clipboard Xv:&Paste|^V|Inserts the Clipboard contents at the insertion point Xw:C&lear|Del|Deletes the selection Xx:Select &All|^A|Selects all Entries or text Xy:&Toggle Sel.|^mA|Selects unselected, deselects selected Xz:&Find...|^F|Opens the Find window XA:Find A&gain|^G|Repeats the last search XB:&Request|^R|Requests the selected Entries / Devices' memory XC:&Transmit|^T|Transmits the selected Entries / Devices' memory XD:&Hold transmission|^mH|Delays the transmission of entries until unchecked again XE:Auto&Surf|^mS|Toggles automatic transmission of clicked Entries XF:Auto&Play|^mP|Toggles automatic playback of the test sequence when an entry is transmitted or changed XG:MIDI &Thru|^mT|Toggles MIDI Thru setting XH:&All Notes Off||Mutes all held notes XI:Reset &Controllers||Resets Controller values to default settings XJ:&Maximum Volume||Sets all channels to maximum volume XK:MIDI &File Capture...||Saves all MIDI output in a Standard MIDI File XL:Open &Library|^1|Opens a Library window of the active Library XM:Open &Setup|^2|Opens the Setup window XN:Open &Memory Manager|^3|Opens a Memory Manager window of the active Device XO:Open &Editor|^4|Opens an Editor window of the selected entry XP:Open Se&quencer|^7|Opens the Sequencer window XQ:Open MIDI M&onitor|^8|Opens the MIDI Monitor window XR:Open &Help|^?|Opens the Help window XU:&Next Window|^+|Switches to the next window XV:&Zoom Window|^#|Maximizes the active window or sets it to its previous state XW:&Close window|^W|Closes the active window XX:&Tile windows|^mW|Arranges windows in a tiled configuration XY:Stac&k windows||Arranges windows in a cascaded configuration Y2:&File||Commands for opening and closing documents, printing and preferences Y3:&Edit||Commands for the Clipboard and searching Y4:&MIDI||Commands for requesting and transmitting data, other MIDI commands Y5:&Windows 88||Commands for managing windows and documents XZ:||Activates this window X.:||Activates this document YA:||Changes the size of the window YB:||Moves the window YC:||Minimizes the window YD:||Maximizes the window YE:||Closes the window YF:||Restores the original size of the window Ya:quitting Yb:closing Ye:Untitled Yf:Save File as: Yg:Load File: Yj:Snapshot Yn:[1][File not found!][Abort] Yo:[3][^0|Result Code = ^1][Proceed|Quit] Yp:[1][^0|Result Code = ^1][OK] Yq:[1][Open a copy of the document ”^0“?][Cancel|Open] Yr:[1][Revert to the last saved version of “^0”?][Cancel|Revert] Yt:[2][^0 cannot open file ^1 (unknown file type).][Cancel] Ys:[1][Save changes to “^0” before ^1?][Don’t save||Cancel|Save] FM:[3][Saving files is disabled in this demo version!|For a fully functional version, please contact your local musical instrument dealer.][Cancel] MI:MIDI Out is disabled in this Demo version! FN:[3][This file is not contained in this Demo version package.|However, you can download it from our Web site at http://www.emagic.de/english/support/download/update.html and drag it onto the “Diver” folder.][Cancel] YG:||Switches to the next window DD:[3][Please start this demo by double-clicking the file “Demo - double-click here”.][OK] Yc:[1][“Apple MIDI Driver” not in System folder!][Continue] Yd:[1][The MIDI Manager has been detected.|Do you want to use it?][Never|Don’t use now|Use now|Always] Yh:[2][Open a copy of the document “^0”?][Cancel|Open] Yu:[3][^0|Result Code = ^1][Quit] Yv:[3][^0 needs the hierarchical file system!][Cancel] Yw:[3][You must have at least System 6.0.4 installed!][Cancel] Yx:[3][^0 needs more memory!][Cancel] Cr: Entries used by Logic Song &Instruments|^mL|Executes the command for Entries which are recalled Program Changes set up in Instruments of used Tracks PT:Hide value in linear parameters IE:[2][This Entry is currently not available, e.g. disabled in Memory Manager display.|To edit it, first adjust the configuration in the Special Parameters box.][OK] US:Insert File Ag:not available PU:Select objects by entering name MJ:[1][MIDI Out is now disabled in this demo version. This limitation does of course not exist in the full version of ^0.][OK] MK:[2][SysEx Communication Error:|%s|This is however normal in this demo version, as MIDI Out has been disabled. To test the MIDI communication, quit and start SoundDiver Demo again.][Help|Abort] PV:Ignore MIDI In Errors Mj:Searching for MIDI interfaces FO:[3][Device “^0” is not supported by Module “^1”. Please make sure that the Module is up to date.][OK]